Remote Codes - Sony

Sony 725

Converting this player to Multi-Region:

  1. Put the Player in StandBy mode.
  2. Press Title on the remote.
  3. Press Clear.
  4. Press Power.
  5. The player will display a system menu on screen.
  6. Be careful with some of the options, but choice of region is apparently in this menu.
  7. Press Power on the remote when finished to complete the change.

Sony 725D

Converting this player to Multi-Region:

  1. Turn the player on.
  2. Press Eject/Open on the player.
  3. Put a region 1 disc into the tray, but don't do anything else.
  4. Press PLAY on the remote control repeatedly and as fast as you can. The film will start eventually.

Sony DAV-D150, Sony DAV-DX150 & Sony DAV-SB100

Create a directory called RMTM0000 with a subdirectory called SCARLET in it. Move file KPJC19_1.DVD into the SCARLET subdirectory. Burn the RMTM0000 directory containing the file KPJC19_1.DVD on a CD-R. Use the ISO-9660 format. Insert the CD-R into your DVD player. Press 0 and Enter to enable the multi-region.

Sony DVP-M50

Create a directory called RMTM0000 with a subdirectory called SCARLET in it. Move file KPJC19_1.DVD into the SCARLET subdirectory. Burn the RMTM0000 directory containing the file KPJC19_1.DVD on a CD-R. Use the ISO-9660 format. Insert the CD-R into your DVD player. Press 0 and Enter to enable the multi-region.

Sony DVP-S336

Put Machine on Standby then type in

You can now watch dvd's from any region

Sony DVP-C660, Sony DVP-C670D, Sony DVP-CX860

Switch off, press 5,5,5, then menu, and then hold down 3 for 3 seconds.

Or

While your system is turned OFF press: the TITLE button then, the CLEAR button then, the POWER button. Select the region

Sony DVP-CX860

Code 1

Open the drive tray. Enter 9,8,1,7 from your remote to access the system menu. Select region from 1 to 6 or set it to 9 for Multiregion. You can also disable Macrovision from this screen.

Code 2

Put the unit in STANDBY mode and press the following buttons on the remote control

Sony DVP-M35

Insert your disc then press DVD menu button, should take you to menu screen for the film, Then select program button on your remote then selected a few chapters from 2 - 20 say then press play, stop, play, stop until it plays the movie (sometimes works straight off others minutes, it may start playing at chapter 15 but once you have it playing just skip back to the beginning.

Sony DVP NC-675P

You can use a OneForAll Kameleon URC8060 remote to make this machine region free. Follow these steps:

  1. Select 'dvd' device on remote
  2. Hold magic button until rabbit comes out
  3. Enter device code '0533'
  4. Hold magic button until rabbit comes out
  5. Press 994
  6. Press magic
  7. Enter first code from below (rabbit disappears)
  8. Hold magic button until rabbit comes out
  9. Press 994
  10. Press magic
  11. Enter second code from below (rabbit disappears)

Repeat steps for last 3 codes.

  1. 1891
  2. 2552
  3. 0953
  4. 2214
  5. 0795

For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '001891'

As soon as you enter the code, the remote will flash the signal sent lights twice to let you know it's learnt that code.

  1. remove any disks, put player into standby mode
  2. press 1,2,3,4,5 - success is displayed and player starts up, it may continuously rotate looking for disks, in this case, unplug from the wall and plug in again. Your player will be region free.

Sony DVP-NS29

Get yourself a OneForAll Remote Control

Set Up Device Remote for Sony:

  1. Press DVD device button on remote
  2. Press and hold Magic button and wait for double blink
  3. Enter device code 0533

Now we need to program Macro Buttons A-E with the following codes, read below for instructions:

For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '00189'

This is how you program those numbers into the Macro Buttons:

  1. Press and hold Magic button until double blink
  2. Press 994.
  3. Briefly press Magic button (don't hold).
  4. Enter 3 digit code from list above.
  5. Press appropriate Macro button (A-E) to store it.
  6. Repeat steps 1 to 5 until all 5 Macro Buttons programmed.

Re-program the player:

  1. Remove any disk in player, put player on standby.
  2. Press Macro Buttons A,B,C,D,E in sequence - SUCCESS is displayed on DVD player and player starts up.
  3. Press Macro Buttons A,B,C,D,E in sequence again - player shuts down (and may restart again) and you're done!

NOTE: For newer versions (B01) of the remote the 994 code accepts 5 digit numbers not 3. If you add 00 to front of each number listed for A,B,C,D,E at section 4. of the macro button programming sequence this should work.

Sony DVP-NS30

Get yourself a OneForAll Remote Control

Set Up Device Remote for Sony

  1. Select DVD device on remote.
  2. Hold Magic button until DVD button flashes twice.
  3. Press 0533

Set Up Device DVD Player

Put a disc in player and put player onto welcome screen.

OneForAll Remote:

  1. Hold magic button down until DVD button on remote flashes twice.
  2. Press 994.
  3. Press Magic button.
  4. Press 1891. For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '001891'
  5. Repeat steps 1 to 3, then press 2552.
  6. Repeat steps 1 to 3, then press 0953.
  7. Repeat steps 1 to 3, then press 2214.
  8. repeat steps 1 to 3, then press 0795.
  9. Remove disc from the player, then put player on stand by.
  10. Press 12345 (success will be displayed and comes out of stand by.
  11. Press 12345 (player goes into stand by and your player is now region free).

YOU CAN ONLY NOW CONNECT YOUR PLAYER TO YOUR TELEVISION BY SCART LEAD AND NOT AV CABLE OR IT WILL PLAY IN BLACK AND WHITE.

Sony DVP NS300

Use a One-For-All controller.

Set the remote for use with the SONY DVD player:

  1. Select DVD device on remote.
  2. Hold MAGIC button until it blinks twice
  3. Enter device code 0533

Program the 5 number buttons with the following codes:

1 = 189 2 = 255 3 = 095 4 = 221 5 = 079

For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '00189'

  1. Hold MAGIC button until it blinks twice
  2. Press 994 ( this is the KEYMAGIC function to set custom key codes)
  3. Press MAGIC button once
  4. Enter 3 digit code from above for the 1st number key, the key will blink twice
  5. Repeat steps 1 to 4 for the remaining four number keys 2 to 5

Make the DVD player region free:

  1. Remove any DVD in the DVD Player, put player on standby.
  2. Press the number keys 1,2,3,4,5 in sequence and player will come out of standby mode, display shows NO DISC
  3. Then press the same sequence again 1,2,3,4,5 player shuts down back into standby mode.
  4. Now simply insert any Region DVD Disc and turn the player on if this doesn't work then turn the DVD player out of standby then repeat only step 3.
  5. The DVD will play without the error message protected by area region.

Sony DVP-NS330


Use a One-For-All controller.

SETUP THE ONE-FOR-ALL AS A SONY REMOTE;

1. Press the AUX key
2. Press and hold the MAGIC key until AUX blinks twice
3. Press 9 9 2
4. Press VCR key
5. Press AUX key
6. Press AUX key
7. Press and hold the MAGIC key until AUX blinks twice
8. Press 0 5 3 3

Your One-For-All remote should now be able to turn on / off your Sony player, with AUX set as the DVD button.

RE-PROGRAMME THE ONE-FOR-ALL NUMBER KEYS (1 to 5)

1. Press and hold the MAGIC key until AUX blinks twice
2. Press 9 9 4
3. Press MAGIC
4. Press 1 8 9 1
For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '001891'
5. Press and hold the MAGIC key until AUX blinks twice
6. Press 9 9 4
7. Press MAGIC
8. Press 2 5 5 2
9. Press and hold the MAGIC key until AUX blinks twice
10. Press 9 9 4
11. Press MAGIC
12. Press 0 9 5 3
13. Press and hold the MAGIC key until AUX blinks twice
14. Press 9 9 4
15. Press MAGIC
16. Press 2 2 1 4
17. Press and hold the MAGIC key until AUX blinks twice
18. Press 9 9 4
19. Press MAGIC
20. Press 0 7 9 5

HACK PLAYER

1. Turn player OFF
2. Press 1 2 3 4 5 - player turns ON, and SUCCESS is displayed on the front panel
3. Press 1 2 3 4 5 - player turns OFF

Congratulations. You're now region free:

Sony DVP-NS355


1, Get yourself a OneForAll Remote Control

Set Up Device Remote for Sony

1, Select DVD device on remote.
2, Hold Magic button until DVD button flashes twice.
3, Press 0533

Set Up Device DVD Player

1, Put a disc in player and put player onto welcome screen.

OneForAll Remote:
1, Hold magic button down until DVD button on remote flashes twice.
2, Press 994.
3, Press Magic button.
4, Press 1891. '001891' for some remotes. The 00 prefix may have to be added to all steps when re-programming numbers.
5, Repeat steps 1 to 3, then press 2552.
6, Repeat steps 1 to 3, then press 0953.
7, Repeat steps 1 to 3, then press 2214.
8, repeat steps 1 to 3, then press 0795.
9, Remove disc from the player, then put player on stand by (Turn off your machine via the remote)
10, Press 12345 (success will be displayed and comes out of stand by.
11, Press 12345 (player goes into stand by and your player is now region free).

YOU CAN ONLY NOW CONNECT YOUR PLAYER TO YOUR TELEVISION BY SCART LEAD AND NOT AV CABLE OR IT WILL PLAY IN BLACK AND WHITE.

Sony DVP-NS50P black


1, Get yourself a OneForAll Remote Control

Set Up Device Remote for Sony

1, Select DVD device on remote.
2, Hold Magic button until DVD button flashes twice.
3, Press 0533

Set Up Device DVD Player

1, Put a disc in player and put player onto welcome screen.

OneForAll Remote:
1, Hold magic button down until DVD button on remote flashes twice.
2, Press 994.
3, Press Magic button.
4, Press 1891. '001891' for some remotes. The 00 prefix will have to be added to all steps when re-programming numbers.
5, Repeat steps 1 to 3, then press 2552.
6, Repeat steps 1 to 3, then press 0953.
7, Repeat steps 1 to 3, then press 2214.
8, repeat steps 1 to 3, then press 0795.
9, Remove disc from the player, then put player on stand by.
10, Press 12345 (success will be displayed and comes out of stand by.
11, Press 12345 (player goes into stand by and your player is now region free).

YOU CAN ONLY NOW CONNECT YOUR PLAYER TO YOUR TELEVISION BY SCART LEAD AND NOT AV CABLE OR IT WILL PLAY IN BLACK AND WHITE.

Sony DVP-PQ2


First of all, get yourself a One4All 'Kameleon' remote control

To Prepare: (this makes sure your remote is configured for your sony DVD player):
1. select dvd device on remote
2. hold magic button until rabbit comes out
3. enter device code 0533

Now we need to program buttons 1..5 (you may want to use the buttons with roman numbers at the bottom of the remote, and use another button for V, which doesn't exist) with the following codes, read below for instructions:
1 - 189
2 - 255
3 - 095
4 - 221
5 - 079

For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '00189'

This is how you program those numbers:
1. Hold magic button until rabbit comes out.
2. Press 994.
3. Press magic (don't hold).
4. Enter 3 digit code from above.
5. Press button (1..5) where to program it.
6. Repeat steps 1 to 5 for all keys.

That works, but more information on macros is included in the one4all manual for you particular model.

Have a go:
1. Remove disk, put player on standby.
2. Press 1,2,3,4,5 - SUCCESS is displayed and player starts up.
3. Press 1,2,3,4,5 - player shuts down and BINGO!

Should work for most of the dvp-ns### players.


Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, Sony DVP-S530D, Sony DVP-S535D, Sony DVP-S536D, Sony DVP-S725D, Sony DVP-S735D



(Some firmware versions only)

Code 1

Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilą. If you don't have good results, disconnect the equipment and repeat.

Code 2

Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8

Code 3

Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.

Sony DVP-S500D


Try the above

And

http://www.haldigital.com/hp/dvd.htm

Sony DVP-S725D


Hold clear, menu and number 4 then a menu will pop up asking you to type the region codes.

Sony Playstation 2 (SCPH 10000 only)


Converting this player to Multi-Region:

1. Press and hold Circle, Right and L1.

2. Press and hold L3 and push the stick in hard.

3. Boot into the PS2 browser without a CD/DVD in the tray.

4. Press Circle and R1 on the DVD

5. Hold Right until a menu appears.

6. Press Circle and R1 again.

Converting this player to Multi-Region if the above does not work:

1. Load the DVD into the PS2.

2. At the browser screen, select the CD icon the press and hold Square and Circle until the DVD menu appears.

3. Either select the 'Play' icon or the 'Movie Start' icon.

This will only work for the first Playstation 2 models.

The following isn't a handset hack, but a basic recommendation.

1. Go out and buy either Action Replay (aka Game Shark) 2, or DVD Region X. This is by far the easiest way to make the Playstation 2 region free (and no green screen on RGB playback). This unfortunately does not work with v7 models.

2. Have a Messiah 2 or Magic 2 chip installed.

Sony RDR-GX300


Get a One-For-All universal remote that has a DVD key and a
"magic" key, such as the One-For-All-4.

* Select DVD device on OneForAll remote
* Hold magic key until double flash on DVD key
* Enter device code 0533

The RDR-GXD500 DVD recorder must be set to command mode
"DVD1", and its own remote set to the same mode like this:

* Switch on recorder and point its own remote at it
* System-Menu -> Setup -> Options -> Command-Mode
* Select DVD1
* Set remote's Command-Mode switch to DVD-1
(it's under the sliding cover)
* Verify that recorder can be switched on and off with
both remotes

Now program function code 189 into button 1 of the OFA
remote like this:

1. Hold magic button until double flash on DVD key
2. Press 994
3. Press magic button (don't hold)
4. Press 189
For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '00189'
5. Press 1 - double flash indicates success

Advanced OFA remotes such as the Kameleon have five digit
function codes, in which case, press 00189 for step 4 above.

Now program function codes into buttons 2-5 like this:

* Repeat steps 1-3, then 255 2
* Repeat steps 1-3, then 095 3
* Repeat steps 1-3, then 221 4
* Repeat steps 1-3, then 079 5

Now the actual conversion of the RDR-GXD500 DVD recorder to
region-free:

* Put DVD recorder on standby and point OFA remote at it.
* Press 12345 - "TIMER OK" is displayed, and recorder
starts up
* Press 12345 - Recorder goes back to standby

The RDR-GX300 DVD recorder is now multi-region.
Clear the OneForAll remote by removing its batteries for a while.

Sony RDR-GXD310


Same as Sony RDR-GX300

Sony RDR-HX510


Same as Sony RDR-HX710

Sony RDR-HX710


We are currently working on an unlock code for your player's original handset, but Sony tend to make these things difficult.


For the time being you'll have to get your hands on a OneForAll remote control.

Set the command mode to DVD1 using the recorder's menu. After that use the OneForAll and enter the code 0533. This will sync the controller to your player.

The procedure to program the buttons is the following:

1. Hold SET (the icon with the hat) button until the LED blinks twice.
2. Select the KEY MAGIC
3. Press the "DVD" icon then Key Magic
4. Now type 001891
For some remotes, the '00' prefix need not be applied, so 001891 would become simply '1891'
5. LED blinks twice
6. Repeat steps 2-5, only this time enter the codes 002552, 000953, 002214, 000745. These have to be entered for each step.
7. Put the player on standby
8. Press 1,2,3,4,5 (pause briefly between each button and
make sure LED of remote flashes)
9. Hit the ON/OFF button from the URC 8204. The first message on the screen of the player should read TIMER OK
10. This should make your player region free.

Of course, we're working on a more simple code for your original Sony controller. However, Sony can be very wily about there protection procedures.


Sony RDR-HX900


Get a One-For-All universal remote

1. select dvd device on remote
2. hold magic button until rabbit comes out
3. enter device code 0533

Now we need to program buttons 1..5 (you may want to use the buttons with roman numbers at the bottom of the remote, and use another button for V, which doesn't exist) with the following codes, read below for instructions:
1 - 189
For some remotes, all of the buttons you need to reprogram need to be prefixed by 00. So 1 would be '00189'
2 - 255
3 - 095
4 - 221
5 - 079

This is how you program those numbers:
1. Hold magic button until rabbit comes out.
2. Press 994.
3. Press magic (don't hold).
4. Enter 3 digit code from above.
5. Press button (1..5) where to program it.
6. Repeat steps 1 to 5 for all keys.

That works, but more information on macros is included in the one4all manual for you particular model.

Have a go:
1. Ensure NO Disc in Player and Player TURNED ON to DVD
2. Press 1,2,3,4,5 - TIMER OK is displayed
3. Press 1,2,3,4,5 - TIMER OK is displayer
4. Press 1,1,2,2,3,3,4,4,5,5 TIMER OK is displayed
5. Press 1,1,2,2,3,3,4,4,5,5 TIMER OK is displayed
6. Power OFF Player, wait a few seconds,
7. Power ON Player, insert Region 1 DVD, and it will work

Sony SLV-D900


Converting this player to Multi-Region:

1. Turn on power with no disc inserted and tray closed.

2. Press Subtitle, 3, 8, 7, 6, 7 on the remote.

3. A message will appear on the display

4. Push on remote: 9 for region-free.

 

Hosting provided by Dargal Solutions